Application
The reel exhaust extractors ALAN are designed for extraction the exhaust fumes emitted by vehicle’s exhaust pipe during the engine tests, control and diagnostics. They are applied in bus depots, garages and car service stations.
At economic optimal air extraction and simple use – the reel’s hose nozzle captures the exhaust fumes and removes them outside. The reel can be mounted directly under the ceiling or to the wall or to a supporting column by means of a bracket set.
The extractor works with following fans produced by KLIMAWENT:
- built-on fan FA – mounted directly to the device
- fan WP-E – mounted on the wall bracket
- roof fan WP-D
Structure
The Reel Exhaust Extractor consists of a winding reel with the exhaust hose with a nozzle to connect at the vehicle’s exhaust pipe. The nozzle sucks in the ambient air, mixes it with the exhaust fumes to decrease the temperature. Exhaust extractors are adapted for hoses of diamwwwweters 4, 5 or 6 inches. In all versions, the free overhang of the hose (fully re coiled on the reel) is 5 to 6,5 feet.
The devices are produced with two sorts of reel drive:
- Type C – spring drive for hose reeling. The hose is wound down manually and reeled up automatically upon the force of a spring mechanism. To the equipped belong following elements:
- band brake – to slow down the hose speed during winding-up
- locking pawl – which locks the hose in the required position (while it is being wound down)
- rubber stopper – fixed on the hose (used to hold the hose after it is fully wound up onto the reel)
- Type E – with electrical drive for “hose wind-up/down”. Inside the reel is placed a gear-motor (of low rotational speed and small motor rate).
NOTE: For fan working with spring driven reel extractors – type C – use electrical equipment described in section FANS.
For fan working with motor driven reel extractors – type E – use the control unit ZE, also serving for reel control “hose wind-up/down”.
 |
 |
| Spring drive |
| Size [in] |
U/C-8 |
U/C-12 |
U/C-8"/8"–30.5"/38" |
U/C-HD |
| A |
30.5 |
39.4 |
30.5 |
47 |
| B |
39.3 |
48.1 |
38.0 |
60 |
| C |
14.0 |
14.0 |
14.0 |
16 |
| D1 |
17.7 |
17.7 |
17.7 |
17.7 |
| D2 |
25.2 |
25.2 |
25.2 |
25.2 |
| E |
30.7 |
30.7 |
30.7 |
30.7 |
- Framework
- Hose reel
- Reel cover
- Spiral
- Connection
- Spring mechanism
- Band brake
|
|
| Motor drive |
| Size [in] |
U/E-8 |
U/E-12 |
U/E-8"/8"–39"/48" |
| A |
30.5 |
39.4 |
39 |
| B |
39.3 |
48.1 |
48 |
| C |
14.0 |
14.0 |
18 |
| D1 |
17.7 |
17.7 |
21.5 |
| D2 |
25.2 |
25.2 |
32 |
| E |
30.7 |
30.7 |
40 |
- Framework
- Hose reel
- Reel cover
- Spiral
- Coupling ferrule
- Gear motor
|
|
Technical data
| Type |
ALAN
-U/C-8 |
ALAN-U/E-8 |
ALAN-U/C-
8"/8"–30.5"/38" |
ALAN-U/E-
8"/8"–39"/48" |
ALAN-
U/C-12 |
ALAN-
U/E-12 |
ALAN-
U/C-HD |
| Part # |
704O11 |
704O13 |
704O95 |
702O15 |
704O12 |
704O14 |
703O62 |
Max. hose
length |
26 ft |
20 ft |
34 ft |
39 ft |
34 ft |
Hose diameter
[in] |
4
5
6 |
8 |
8 |
4
5
6 |
8 |
Recommended
air flow |
250
400
900 |
— |
— |
250
400
900 |
— |
Flow resistance *
[in. w.g] |
4.4
4.8
6.0 |
— |
— |
6.0
6.4
8.0 |
— |
| Weight ** [lb] |
98.1 |
115 |
132 |
102.5 |
200 |
Fans to operate
with |
FA-0, WP-05-E, WP-05-D
FA-1, WP-07-E, WP-07-D
FA-2, WP-08-E, WP-08-D |
— |
— |
FA-2, WP-08-E, WP-08-D
FA-2, WP-08-E, WP-08-D
FA-3, WP-09-E, WP-09-D |
— |
* At fully recoiled hose.
** Without hose.
Build-on fans – mounted directly to the reel extractor
 |
Type |
Part # |
Supply
[V] |
Inlet/outlet
diameter
[in] |
Motor
power
[HP] |
Noise level *
[dB(A)] |
Weight
[lb] |
| FA-0 |
704W10 |
120 |
6/6 |
1.0 |
63 |
53 |
| FA-0 |
704W11 |
3 × 230/460 |
| FA-1 |
704W12 |
120 |
6/8 |
2.0 |
68 |
57 |
| FA-1 |
704W15 |
3 × 230/460 |
| FA-2 |
704W13 |
3 × 230/460 |
6/8 |
3.0 |
70 |
66 |
| FA-3 |
704W14 |
3 × 230/460 |
6/8 |
4.0 |
72 |
77 |
* From 16.4 feet distance.
Hose sets
 |
Type |
Part # |
Hose
diameter
[in] |
Weight
[lb] |
Hose
length
[ft] |
| ZW-8/100 |
828P64 |
4 |
11.5 |
26 |
| ZW-8/125 |
828P65 |
5 |
14.1 |
26 |
| ZW-8-150 |
828P66 |
6 |
16.8 |
26 |
| ZW-12/100 |
828P67 |
4 |
17.2 |
39 |
| ZW-12/125 |
828P68 |
5 |
20.9 |
39 |
| ZW-12/150 |
828P69 |
6 |
32.6 |
39 |
The hose-assembly consists of a flexible hose G-EX1 of thermal
resistance from 68 F to 302 F (intermittent up to 392 F), 2 pc. of hose clamps, rubber cover and reducer suitable for hose diameter. |
Rubber stopper
 |
Type |
Part # |
Inner
diameter
[in] |
| ZO-100 |
804K40 |
4 |
| ZO-125 |
804K41 |
5 |
| ZO-150 |
804K42 |
6 |
| ZO-200 |
704K39 |
8 |
Used in spring driven reel extractors fixed on
the hose. |
Nozzles
| Sort of nozzle |
Type |
Part # |
Connection
diameter
[in] |
Inlet size
[in] |
Weight
[lb] |
Remarks |
 |
AN-100
AN-125
AN-150 |
819S06
819S07
819S08 |
4
5
6 |
5
5
6 |
2.2
2.6
3.2 |
metallic with a
clamp wheel |
 |
SZGO-125
SZGO-150 |
819S28
819S29 |
5
6 |
6
6.7 |
5.5
7.1 |
circular rubber
with clamping
mechanism |
 |
SZGP-100
SZGP-125 |
819S18
819S19 |
4
5 |
7.1 × 4
8.7 × 6 |
4.6
7.1 |
oval rubber
with clamping
mechanism |
Wall bracket
 |
| Type |
Part # |
Length [in] |
Weight [lb] |
| L860 |
817W33 |
31.5 |
26.5 |
Set – serves to mount the reel extractor to the
wall or supporting
column. |
Control unit – for reel exhaust extractor type E
 . |
Type |
Part # |
Supply
[V] |
| ZE-ALAN-U/E-1P-120V |
311Z40 |
120 |
| ZE-ALAN-U/E-3P-230V |
311Z41 |
3 × 230 |
| ZE-ALAN-U/E-3P-460V |
311Z42 |
3 × 460 |
|
